Dalsa Spyder3 Manual do Utilizador Página 42
- Página / 104
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
42 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual
03-032-20123-01 Teledyne DALSA
Image Flip Horizontal
This feature is used to flip horizontally the image sent by
the device. Default value: not flipped.
Pixel Format
Use the Pixel Format feature found in the Image Format Control set to select the format of the pixel to use
during image acquisition as either Mono 8 or Mono 12 bit depth.
GigE Vision Input Controls
Image Format Control
Parameter
Description
Pixel Format
Mono 8
Mono 12
Sensitivity Mode
To set the sensitivity mode use the Sensitivity Mode feature found as part of the Image Format Control
set. When using high sensitivity mode, the cameras responsivity increases. High sensitivity mode permits
much greater scanning speeds in low light. It can also allow for reduced lighting levels. The available
modes are: Low, High, and Tall.
More description and examples of the sensititivy mode can be found in the App endix.
GigE Vision Input Controls
Image Format Control
Parameter
Description
Sensitivity Mode
High
Low
Tall
Sensor Direction Control
Found in the I / O Control > Direction Control set of features. Note: This feature is available when in
high sensitivity mode only.
Note: the Sensor Shift features are not available when the camera is in low or tall pixel sensitivity modes.
GigE Vision Input Controls
Direction Control
Parameter
Description
Sensor Scan Direction
When in high sensitivity mode, selects the forward or
reverse CCD shift direction or external direction control.
This accommodates object direction change on a web and
allows you to mount the camera "upside down"
Sensor Shift External Direction
The current sensor shift direction when the direction is
- Spyder3 SG-14 1
- Support 2
- Industry Standards 2
- Contents 3
- The Spyder3 SG-14 Cameras 6
- Certifications 10
- Responsivity 11
- Mechanicals 12
- Image Sensor 14
- Host System Requirements 15
- Network Adapter Requirements 15
- 5. Operate the Camera 16
- Install Network Card 17
- Configure Network Card 17
- Power Connector 20
- Status LED 21
- GPIO Isolation 22
- GPIO Configuration 22
- TTL Inputs and Outputs 23
- Power on the camera 24
- Connect to the camera 24
- Check LED Status 24
- Software Interface 24
- CamExpert Panes 26
- Review a Test Pattern Image 28
- Camera Operation 29
- User Setting 32
- Factory (Default) Settings 32
- External trigger 33
- Software trigger 33
- Valid Data From 34
- Diagramed 34
- Set the Exposure Mode 35
- Exposure Modes in Detail 36
- Line Rate 37
- Exposure Time 38
- Triggers 38
- Input / Output Control 39
- Image Size 41
- Pixel Format 42
- Sensitivity Mode 42
- Sensor Direction Control 42
- Sensor Shift Direction 43
- Binning 44
- Resetting the Camera 44
- Camera Calibration 45
- Analog Processing 46
- Digital Processing 46
- Set Analog Gain 47
- Calibrate Camera Gain 47
- Calibration Returns: 48
- Update Analog Gain Reference 49
- Calibration Overview 49
- Correction Overview 50
- Digital Signal Processing 51
- Step 2: FPN Calibration 53
- PRNU Calibration Results 54
- Setting Digital Offset 54
- Subtracting Background 54
- Setting Digital System Gain 54
- Gate Dark Current Clear 55
- Auto Mode (srm 0) 55
- Setting the Readout Mode 57
- Appendix B: Sensitivity Mode 58
- Pixel DetailPixel Detail 59
- The GPIO Connector 60
- Configure GPIO Signal Levels 61
- Internal frame trigger 62
- Encoder 66
- Outputs 71
- Trigger Settings: GURU Mode 73
- Pulse Generator 76
- Pulse Period (ns) 77
- Pulse Frequency (Hz) 77
- Pulse Generator Timing 77
- Rescaler 78
- Counter 80
- Input Debouncing 81
- Timestamp Counter 82
- Clear Mode 83
- Clear Input 83
- Broadcast 83
- Set Value 83
- Current Value 83
- Delayer 84
- The PLC Control Block 85
- GPIO Output Labels 87
- Signal Routing Block 89
- How the Lookup Table Works 93
- Appendix D: EMC Declaration 94
- Examples: Setting the FVAL 99
- Revision History 102
Manuais e produtos relacionados com Câmaras de segurança Dalsa Spyder3
Câmaras de segurança Dalsa C1280 Manual do Utilizador
(133 páginas)
(133 páginas)
Câmaras de segurança Dalsa BOA Manual do Utilizador
(136 páginas)
(136 páginas)
Câmaras de segurança Dalsa BOA Manual do Utilizador
(12 páginas)
(12 páginas)
Câmaras de segurança Dalsa C1410 Manual do Utilizador
(131 páginas)
(131 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.111 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais